MD 2002 – Metal detector
Main component parts
- Motorised belt conveyor specially designed to prevent magnetic interference with the detector coil (conveyor at least 2250 mm long, depending on bag passage opening);
- detection system;
- electronic digital terminal installed on the detector coil structure;
- standard bag passage opening 300 (h) x 700 (l) mm (larger or smaller sizes are available);
- Ethernet interface.
Technical data
SENSITIVITY TABLE
| Passage height | Passage width | ||
| 600 | 650 | 700 | |
| 250 | Ø 1,7 | Ø 1,8 | Ø 1,9 |
| Ø 1,8 | Ø 2,1 | Ø 2,2 | |
| Ø 2,6 | Ø 2,8 | Ø 3 | |
| 300 | Ø 2 | Ø 2,1 | Ø 2,2 |
| Ø 2,2 | Ø 2,3 | Ø 2,5 | |
| Ø 3 | Ø 3,1 | Ø 3,2 | |
| 350 | Ø 2,1 | Ø 2,2 | Ø 2,3 |
| Ø 2,3 | Ø 2,4 | Ø 2,6 | |
| Ø 3,2 | Ø 3,4 | Ø 3,6 | |
The values refer to the minimum diameter in mm of foreign bodies detected. They are guideline, since the metal detector’s sensitivity is closely dependent on the physical characteristics of the product, such as humidity and weight.
GENERAL CHARACTERISTICS
SELF-CALIBRATION FUNCTION
Automatic self-calibration function with cycle programmable from keyboard.
READING RANGE
Scanning field adjustment.
AUTOMATIC COMPENSATION OF SENSITIVITY
Automatic compensation of sensitivity level in relation to variation in product humidity percentage.
EVENTS LOG
Events log displayable on local control panel (or transferable via Ethernet) including:
- current date
- last reset date
- total bags inspected
- total bags rejected
PROTECTION
Protection class IP 69.
CONSTRUCTION
MD detection system + terminal constructed in AISI 304 STAINLESS STEEL.
VISUAL ALARM
Visual and acoustic alarm for out-of-tolerance bags.
REMOTE CONNECTION
Remote connection for bag ejector.
DIMENSIONS
Dimensions in mm
IN-LINE QUALITY CONTROL SYSTEM:
MD 2002 Metal detector - CP 812 Weight monitor - RJCT 368/10 Bag rejecter.
Automatic, constant, assured control of all production process stages.
APPLICATION
This system is specially designed to carry out meticulous quality control and assure uniform output.
It guarantees the absence of metallic foreign bodies (magnetic and non-magnetic) inside bags (rejecting those which do not conform). What’s more, it allows weighing operations to be performed with top precision, and provides direct generation of production reports.
INSTALLATION
There are no installation problems. The system is located in-line, downstream of the bagging system.
DOWNLOAD PDF FOLDER
Sensitivity table
SENSITIVITY TABLE
| Passage height | Passage width | ||
| 600 | 650 | 700 | |
| 250 | Ø 1,7 | Ø 1,8 | Ø 1,9 |
| Ø 1,8 | Ø 2,1 | Ø 2,2 | |
| Ø 2,6 | Ø 2,8 | Ø 3 | |
| 300 | Ø 2 | Ø 2,1 | Ø 2,2 |
| Ø 2,2 | Ø 2,3 | Ø 2,5 | |
| Ø 3 | Ø 3,1 | Ø 3,2 | |
| 350 | Ø 2,1 | Ø 2,2 | Ø 2,3 |
| Ø 2,3 | Ø 2,4 | Ø 2,6 | |
| Ø 3,2 | Ø 3,4 | Ø 3,6 | |
The values refer to the minimum diameter in mm of foreign bodies detected. They are guideline, since the metal detector’s sensitivity is closely dependent on the physical characteristics of the product, such as humidity and weight.
General characteristics
GENERAL CHARACTERISTICS
SELF-CALIBRATION FUNCTION
Automatic self-calibration function with cycle programmable from keyboard.
READING RANGE
Scanning field adjustment.
AUTOMATIC COMPENSATION OF SENSITIVITY
Automatic compensation of sensitivity level in relation to variation in product humidity percentage.
EVENTS LOG
Events log displayable on local control panel (or transferable via Ethernet) including:
- current date
- last reset date
- total bags inspected
- total bags rejected
PROTECTION
Protection class IP 69.
CONSTRUCTION
MD detection system + terminal constructed in AISI 304 STAINLESS STEEL.
VISUAL ALARM
Visual and acoustic alarm for out-of-tolerance bags.
REMOTE CONNECTION
Remote connection for bag ejector.
Dimensions
DIMENSIONS
Dimensions in mm
In-line quality control system
IN-LINE QUALITY CONTROL SYSTEM:
MD 2002 Metal detector - CP 812 Weight monitor - RJCT 368/10 Bag rejecter.
Automatic, constant, assured control of all production process stages.
APPLICATION
This system is specially designed to carry out meticulous quality control and assure uniform output.
It guarantees the absence of metallic foreign bodies (magnetic and non-magnetic) inside bags (rejecting those which do not conform). What’s more, it allows weighing operations to be performed with top precision, and provides direct generation of production reports.
INSTALLATION
There are no installation problems. The system is located in-line, downstream of the bagging system.
Download pdf
DOWNLOAD PDF FOLDER
For more information, fill out the form.
